Aqua Nails AS-5000 is a one-component, high-performance, pasty construction adhesive designed for bonding a variety of common construction materials. It has a strong initial grip, excellent adhesion, and will not sag on vertical surfaces.
Ideal for bonding most building materials: wood, OSB panels, chipboard, metal, concrete, fiber cement board, ceramics, bricks, floor panels. Adhesive can use on polystyrene and mirror.
How to use Aqua Nails AS-5000
- Surfaces must be clean, dry, and free of dirt, grease, oil, or water.
- For a neat finish, please, apply masking tape and remove it before construction adhesive skins over.
- Cut tip-off and puncture the internal foil seal with nozzle. Cut the nozzle at a 45° angle to the desired bead-width and apply to the substrate with a cartridge gun.
- Two-way contact (lighter connection): Apply adhesive to the base to bond, press, and pull apart. Allow to tack-off for 10 to 30 seconds and press firmly together again. The contact areas tap with a rubber mallet to ensure tight contact.
- One-way method (Heavier substrate bonding): Apply adhesive to the base to bond, press firmly, and securely fasten them together (clamp, nail, screw, etc.). Retain fastening for a minimum of 24 hours.
- Any wet or partially wet adhesive can be removed with a piece of cloth. The dried adhesive is best removed with a scraper or by sanding.
Tack-free Time: <5 minutes (at 25 °C & 50% R.H)
Application temperature: -20 °C – 38 °C
Service temperature: -30 °C – 60 °C
Storage: Store in a dry and cool place with a temperature below 30 °C.
More information about ALSEAL products
Reviews
There are no reviews yet.